unknown

Main parameters : 

Pipe : Stainless steel 

Insulating material : high purity magnesium oxide powder. 

Heating wire : Ni8OCr20 nickel wire 

Diameter : Φ5mm-Φ25mm 

Diameter tolerance : -0.02mm-0.08mm 

Tube length : maximum length 3000mm 

Tube length tolerance : ± 5 % 

Appearance requirements : smooth surface, no scratches, no spots, no depression 

Unheated length : Customized on demand 

Watt density : max. 40W / cm2 

Power tolerance : ± 10 % ( ± 5 % -10 % ). ) 

Appearance temperature : tube temperature maximum temperature 927 °C 

Component temperature : maximum heating temperature 

Connector temperature : maximum temperature 260 °C 

Connection voltage : customized on demand 

High voltage strength : minimum 800VAC heating coil voltage maximum 1250V 

Insulation resistance : ≥ 5MΩ ( 500VDC ) 

Leakage current : ≤ 0,5 mA ( 253 V AC ) 

Electrical performance : leakage current less than 0.5mA

Outgoing mode : 

Inner line, outer line 

Better protection wire inside out wire is not easy to break, but the cost is higher than the outside line 

Outgoing angle : 

Direct outlet, 90 degree Angle outlet, side outlet, etc., customized according to the needs of equipment installation wiring