Main parameters :
Pipe : Stainless steel
Insulating material : high purity magnesium oxide powder.
Heating wire : Ni8OCr20 nickel wire
Diameter : Φ5mm-Φ25mm
Diameter tolerance : -0.02mm-0.08mm
Tube length : maximum length 3000mm
Tube length tolerance : ± 5 %
Appearance requirements : smooth surface, no scratches, no spots, no depression
Unheated length : Customized on demand
Watt density : max. 40W / cm2
Power tolerance : ± 10 % ( ± 5 % -10 % ). )
Appearance temperature : tube temperature maximum temperature 927 °C
Component temperature : maximum heating temperature
Connector temperature : maximum temperature 260 °C
Connection voltage : customized on demand
High voltage strength : minimum 800VAC heating coil voltage maximum 1250V
Insulation resistance : ≥ 5MΩ ( 500VDC )
Leakage current : ≤ 0,5 mA ( 253 V AC )
Electrical performance : leakage current less than 0.5mA
Outgoing mode :
Inner line, outer line
Better protection wire inside out wire is not easy to break, but the cost is higher than the outside line
Outgoing angle :
Direct outlet, 90 degree Angle outlet, side outlet, etc., customized according to the needs of equipment installation wiring
