Main parameters :

Pipe : Stainless steel

Insulating material : high purity magnesium oxide powder.

Heating wire : Ni8OCr20 nickel wire

Diameter : Φ5mm-Φ25mm

Diameter tolerance : -0.02mm-0.08mm

Tube length : maximum length 3000mm

Tube length tolerance : ± 5 %

Appearance requirements : smooth surface, no scratches, no spots, no depression

Unheated length : Customized on demand

Watt density : max. 40W / cm2

Power tolerance : ± 10 % ( ± 5 % -10 % ). )

Appearance temperature : tube temperature maximum temperature 927 °C

Component temperature : maximum heating temperature

Connector temperature : maximum temperature 260 °C

Connection voltage : customized on demand

High voltage strength : minimum 800VAC heating coil voltage maximum 1250V

Insulation resistance : ≥ 5MΩ ( 500VDC )

Leakage current : ≤ 0,5 mA ( 253 V AC )

Electrical performance : leakage current less than 0.5mA

Outgoing mode :

Inner line, outer line

Better protection wire inside out wire is not easy to break, but the cost is higher than the outside line

Outgoing angle :

Direct outlet, 90 degree Angle outlet, side outlet, etc., customized according to the needs of equipment installation wiring